REWORK SYSTEM, SOLDERING/DESOLDERING TOOLS, INSPECTION SYSTEM

REWORK SYSTEM RD-500III / SIII

Designed for Standard or Lead Free Solders, Large or Small Boards, Large or Small Components

Both the RD-500III and the RD-500SIII feature 700 watt upper and lower hot air heaters. By delivering hot air simultaneously from above and below, these units are able to evenly heat the component and solder connections.

REWORK SYSTEM SD-3000II

Simple & Precise Operation.
You Can Rework Nearly Any SMT Component

This rework system is designed to remove most SMT components like QFPs, SOPs, PLCCs SOJs, PGAs, BGAs, Connectors and other chips. It does not require any special nozzles or additional accessories.

SOLDERING TOOLSS-8400

Adopting Super Tip!!
It has been developed specifically for lead free soldering.

- Using an internal heater you only need to change the tips. - The temperature data below shows heating comparable to tip-heater cartridge designs. - The Super Tip has been developed for the long life/low cost/lead free soldering (PAT,PEND). -Versatile With Stand by Functions & etc.

SOLDERING TOOLSS-8300

Introducing Super Tip!!
Your measures for the lead free soldering will be perfect.

- Using an internal heater you only need to change the tips. - The temperature data below shows heating comparable to tip-heater cartridge designs. - The Super Tip has been developed for the long life/low cost/lead free soldering (PAT,PEND).

SOLDERING TOOLSS-8200

Compact, Light and Efficient

The SS-8100D is an ultra compact digital soldering iron station. It was designed to work under the highest loads with a user-friendly ergonomic design.

Soldering/Desoldering ToolSC-400A

Double Pump for a quick and powerful suction and easy clean up

Designed For SMT and Thru-hole Desoldering of Eutectic or Lead Free Solders.

DESOLDERING TOOLSC-7000Z

DEN-ON NSC-7000Z is of the pump built-in structure with a temperature control circuit. Best tool recognized all over the world.
Suction capacity and hot blow system are further powered up. Removal of chip and SMD component is done with more and more efficiency.

Thin Shape Spot Pre-heaterPH-400

Designed for Lead Free

Furthermore power up with a max intense of 360W IR Heater to provide additional heating necessary to successfully solder/ desolder small PCBs.

FAST EFFICIENT PRE-HEATERPH-3100A

Fast and Safety Manual Soldering

This pre-heater uses 2 200W IR heaters and closed –loop control to enable fast and safety manual soldering. It is designed for multilayered PCB under Lead-free solder with large heat sinks.